Yamaha TZ250/350 parts

 Here is a list of Yamaha TZ parts

For now it is a place hold for images, I will update this shortly.

TZ250/350 C/D/E


Fuel tank rubber damper mounts


Check out the item available now on eBay.




TZ250/350 E/F/G


Fork top caps



Comments

Post a Comment

Popular posts from this blog

Folding tool kit handles - About and Fitting guide

Image
1.1 HPE tool kit shadow foam layer handles Contents A)    Intro - About the Folding tool kit handles B)   Fitting guide A)   Intro -  About the Folding tool kit handles Fitting our tool kit handles is easy and adds a really professional look to your shadow foamed tool kit layers. 1.2 20mm base plate Here we will walk you through how to fit them. However we will start a little before that just in case you are reading this whilst trying to decide what to buy. We have also peppered in a few suggestions on where to find items you will need with links or suggested brands in orange . Considerations before buying You are going to need to know  what things  (tools)  you intend to put in this container and how deep the foam will need to be for those things to sit flat. Remember, different depth foam requires different length base plates. fig 2.1 20,30,50mm base plates Different foam colours can be used to help tool organisation. You may want to choose different colour handles to complement this
Read more

Mightily small handles - About &Fitting guide

Image
1.1 Mighty small handle 3D drawing. Contents A)    Intro - About the mighty small handle B)   Fitting guide A)   Intro - About the mighty small handle 1.1 HPE Folding Tool kit handle CP PETg After the success of our folding tool kit handles, we decided we needed to go bigger, by going smaller.    The idea was pretty simple; make a handle for smaller shadow foam shelves that could be removed from  from a larger kit  to enable small items to be brought closer to the work area whilst still keeping things organised.  Design Key elements were: They have to be very compact. Light weight. Be easy to use. be strong enough to support a wide range of tools. fig 2.2 testing After some testing a final design was chosen with a base size taking up 40mm X 15mm of space each. Not bad at all! Stress testing was carried out till we ran out of things to hand off of our test handle, ending up with an  8kg per handle load,  a FoS (Factor of Safety) of 5. That is way more than is needed for this tiny littl
Read more

Yamaha FZ600 Chain Guide Swingarm Protector

Image
  Yamaha FZ600 Chain Guide Swingarm Protector fig1.1 - HPE chain guide for Yamaha FZ600 Intro We have produced two chain guides / swingarm guards for the Yamaha FZ600 and early FZ400. We have a hard-wearing version in nylon and a TPU version which is more like the traditional rubber. This takes best advantage of an FDM 3D printer by producing a part in small batches to match the rarity of your motorcycle whilst also making them lighter than the OEM part.  The chain guide features increased wall thickness to allow the already highly wear-resistant material to last even longer. We expect the TPU part not to be as hard-wearing as the Nylon but it has the advantage of being cheaper and much easier to fit.  It is worthy of note however; that a poorly adjusted, unlubricated and/or rusty chain will make short work of eating through any chain guide. Fitting Guide The HPE TPU FZ600 chain guide will fit and remove in the same way as the OEM part, as it can flex and stretch into place without th
Read more